2013年10月21日星期一

Free download of the best Motorola Solutions certification MSC-122 exam training materials

Today, the IT industry is facing fierce competition, you will feel powerless, this is inevitable. All you have to do is to escort your career. Of course, you have many choices. I recommend that you use the IT-Tests.com Motorola Solutions MSC-122 exam questions and answers, it is a good helper to help your success of IT certification. So what you still waiting for, go to get new IT-Tests.com Motorola Solutions MSC-122 exam training materials early.

With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Motorola Solutions's MSC-122 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. IT-Tests.com has the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans. We guarantee you 100% certified. Candidates who participate in the Motorola Solutions MSC-122 certification exam, what are you still hesitant?Just do it quickly!

The society has an abundance of capable people and there is a keen competition. Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever. Qualifications is just a stepping stone, and strength is the cornerstone which can secure your status. Motorola Solutions MSC-122 certification exam is a popular IT certification, and many people want to have it. With it you can secure your career. IT-Tests.com's Motorola Solutions MSC-122 exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance. Then you no longer need to worry about being fired by your boss.

Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With IT-Tests.com Motorola Solutions MSC-122 exam training materials, the kind of mentality will disappear. With IT-Tests.com's Motorola Solutions MSC-122 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.

Exam Code: MSC-122
Exam Name: Motorola Solutions (Deploy WLAN Solutions)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 113 Questions and Answers
Last Update: 2013-10-21

MSC-122 (Deploy WLAN Solutions) Free Demo Download: http://www.it-tests.com/MSC-122.html

NO.1 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions   MSC-122   MSC-122

NO.2 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions   MSC-122   MSC-122 demo   MSC-122   MSC-122

NO.3 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions pdf   MSC-122   MSC-122   MSC-122 test answers   MSC-122 exam simulations

NO.4 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions pdf   MSC-122 certification training   MSC-122   MSC-122 exam   MSC-122 exam simulations

NO.5 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions   MSC-122   MSC-122 study guide

NO.6 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

Motorola Solutions original questions   MSC-122   MSC-122 exam simulations   MSC-122 demo

NO.7 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

Motorola Solutions   MSC-122 test   MSC-122   MSC-122

NO.8 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions practice test   MSC-122 questions   MSC-122   MSC-122   MSC-122   MSC-122 practice test

NO.9 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions study guide   MSC-122   MSC-122   MSC-122 exam prep   MSC-122

NO.10 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

Motorola Solutions exam   MSC-122 certification   MSC-122   MSC-122

NO.11 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions certification training   MSC-122 practice test   MSC-122 exam simulations   MSC-122   MSC-122 exam dumps   MSC-122

NO.12 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions   MSC-122 exam dumps   MSC-122 answers real questions   MSC-122   MSC-122 test

NO.13 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

Motorola Solutions   MSC-122 demo   MSC-122   MSC-122   MSC-122 study guide

NO.14 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions exam dumps   MSC-122 exam   MSC-122   MSC-122 braindump   MSC-122

NO.15 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

Motorola Solutions test answers   MSC-122   MSC-122 original questions   MSC-122

IT-Tests.com offer the latest LOT-958 Questions & Answers and high-quality HP0-Y46 PDF Practice Test. Our 100-101 VCE testing engine and MB5-858 study guide can help you pass the real exam. High-quality E20-554 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/MSC-122.html

没有评论:

发表评论