あなたはまだ何を待っているのですか。機会が一回だけありますよ。いまJuniperのJN0-343試験問題のフルバージョンを取ることができます。JPexamというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いJuniperのJN0-343試験トレーニング資料を見つけましたから、JPexamの問題と解答を安心に利用してください。きっと試験に合格しますよ。
JPexamの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。
恐いJuniperのJN0-343試験をどうやって合格することを心配していますか。心配することはないよ、JPexamのJuniperのJN0-343試験トレーニング資料がありますから。この資料を手に入れたら、全てのIT認証試験がたやすくなります。JPexamのJuniperのJN0-343試験トレーニング資料はJuniperのJN0-343認定試験のリーダーです。
JPexamの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったJuniperのJN0-343認証試験について教育資料が完成してから、大変にお客様に歓迎されます。JPexamの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。
試験番号：JN0-343問題集
試験科目：Juniper Networks Certified Internet Specialist (JNCIS-ENT)
最近更新時間：2014-01-21
問題と解答：全393問
100％の返金保証。1年間の無料アップデート。
IT業界の一员として、君はまだIT認証試験を悩んでいますか？認証試験はITの専門知識を主なテストとして別に初めてIT関連の認証試験に参加する受験生にとってはとても難しいとみされます。良い対応性の訓練が必要で、JPexam の問題集をお勧めます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-343_exam.html
NO.1 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper認定証 JN0-343 JN0-343 JN0-343
NO.2 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper認定証 JN0-343過去問 JN0-343参考書
NO.3 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343 JN0-343認定資格 JN0-343認定試験 JN0-343 JN0-343参考書
NO.4 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343参考書 JN0-343
NO.5 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper練習問題 JN0-343 JN0-343
NO.6 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper JN0-343認証試験 JN0-343 JN0-343
NO.7 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper過去問 JN0-343 JN0-343過去問 JN0-343認証試験 JN0-343
NO.8 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343認証試験 JN0-343認定資格 JN0-343 JN0-343認証試験
NO.9 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper JN0-343認定資格 JN0-343 JN0-343 JN0-343
NO.10 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper JN0-343認定資格 JN0-343 JN0-343認定証
NO.11 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper参考書 JN0-343過去問 JN0-343
NO.12 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343問題集 JN0-343認定資格 JN0-343練習問題 JN0-343
NO.13 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper JN0-343 JN0-343
NO.14 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 JN0-343
NO.15 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343認定証 JN0-343問題集
NO.16 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper認定試験 JN0-343 JN0-343認証試験
NO.17 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper過去問 JN0-343練習問題 JN0-343問題集 JN0-343 JN0-343
NO.18 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper JN0-343過去問 JN0-343
NO.19 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343 JN0-343認定試験 JN0-343 JN0-343認定試験
NO.20 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper認定試験 JN0-343 JN0-343認証試験 JN0-343
NO.21 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper参考書 JN0-343 JN0-343参考書
NO.22 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper参考書 JN0-343 JN0-343 JN0-343
NO.23 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper練習問題 JN0-343 JN0-343練習問題 JN0-343認定証 JN0-343 JN0-343認定試験
NO.24 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper JN0-343 JN0-343
NO.25 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper過去問 JN0-343 JN0-343認証試験 JN0-343過去問
NO.26 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper過去問 JN0-343認証試験 JN0-343認証試験
NO.27 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 JN0-343認定証 JN0-343
NO.28 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper認定証 JN0-343認定資格 JN0-343 JN0-343過去問
NO.29 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343 JN0-343
NO.30 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper JN0-343 JN0-343過去問 JN0-343
JPexamは最新のHP2-W100問題集と高品質の000-540問題と回答を提供します。JPexamの650-304 VCEテストエンジンと1Z0-033試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TFIN52_64 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论