IT認証試験を受かるかどうかが人生の重要な変化に関連することを、受験生はみんなよく知っています。JPexamは低い価格で高品質の迫真の問題を受験生に提供して差し上げます。JPexamの製品もコスト効率が良く、一年間の無料更新サービスを提供しています。当社の認定トレーニングの材料は、すぐに入手できます。当社のサイトは答案ダンプのリーディングプロバイダーで、あなたが利用したい最新かつ最正確の試験認定トレーニング材料、いわゆる試験問題と解答を提供しています。
IT認定試験を受ける受験生はほとんど仕事をしている人です。試験に受かるために大量の時間とトレーニング費用を費やした受験生がたくさんいます。ここで我々は良い学習資料のウェブサイトをお勧めします。JPexamというサイトです。JPexamの HitachiのHH0-220試験資料を利用したら、時間を節約することができるようになります。我々はあなたに向いて適当の資料を選びます。しかも、サイトでテストデータの一部は無料です。もっと重要のことは、リアルな模擬練習はあなたがHitachiのHH0-220試験に受かることに大きな助けになれます。JPexam のHitachiのHH0-220試験資料はあなたに時間を節約させることができるだけではなく、あなたに首尾よく試験に合格させることもできますから、JPexamを選ばない理由はないです。
あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、HH0-220認定試験を受験して認証資格を取るのは一つの良い方法です。Hitachiの認定試験のHH0-220資格は非常に大切なものですから、Hitachiの試験を受ける人もますます多くなっています。
試験番号：HH0-220問題集
試験科目：HDS Certified Implmenter-Modular
最近更新時間：2014-02-17
問題と解答：全109問
100％の返金保証。1年間の無料アップデート。
HH0-220認定試験の準備を効率的にするために、どんなツールが利用に値するものかわかっていますか。私は教えてあげますよ。JPexamのHH0-220問題集が一番頼もしい資料です。この問題集がIT業界のエリートに研究し出されたもので、素晴らしい練習資料です。この問題集は的中率が高くて、合格率が100％に達するのです。それはIT専門家達は出題のポイントをよく掴むことができて、実際試験に出題される可能性があるすべての問題を問題集に含めることができますから。不思議だと思っていますか。しかし、これは本当のことですよ。
IT認定試験に関連する資料を提供するプロなウェブサイトとして、JPexamはずっと受験生に優秀な試験参考書を提供し、数え切れない人を助けました。JPexamのHH0-220問題集はあなたに試験に合格する自信を与えて、楽に試験を受けさせます。このHH0-220問題集を利用して短時間の準備だけで試験に合格することができますよ。不思議でしょう。しかし、これは本当なことです。この問題集を利用する限り、JPexamは奇跡を見せることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HH0-220_exam.html
NO.1 What is Hitachi Data System's recommended practice for zoning?
A. port-based zoning
B. zoning is optional
C. single HBA zoning (one HBA per zone)
D. single operation system zoning (all HBAs from one OS in a zone)
Answer: C
Hitachi練習問題 HH0-220 HH0-220 HH0-220認定試験 HH0-220 HH0-220
NO.2 A customer has a Hitachi Unified Storage (HUS) system model 110 configured with iSCSI I/O interface
boards. They now want to connect it to a FC-SAN and have purchased the FC-Option upgrade to do so.
Which two tasks must be performed on the HUS system? (Choose two.)
A. Set the HUS FC port topology as Fabric.
B. Set the HUS FC port topology as Point-to-Point.
C. Install and enable the FC-Option on the HUS.
D. Install and enable the FC Expansion Board.
Answer: B,C
Hitachi認定試験 HH0-220認証試験 HH0-220問題集 HH0-220問題集 HH0-220
NO.3 You are implementing a Hitachi Unified Storage File Module cluster with a single SMU. How do you run
the smu-config script?
A. Connect an Ethernet cable and login as supervisor.
B. Connect a serial null-modem cable and login as supervisor.
C. Connect an Ethernet cable and login as root.
D. Connect a serial null-modem cable and login as root.
Answer: D
Hitachi問題集 HH0-220認定資格 HH0-220
NO.4 When implementing host access security for a LUN in a Hitachi Unified Storage system, to what is the
host WWN applied?
A. Host Group
B. Storage Group
C. Domain Group
D. Link Group
Answer: A
Hitachi練習問題 HH0-220 HH0-220問題集 HH0-220認定資格 HH0-220参考書
NO.5 A customer wants to start using ShadowImage on several of their existing Hitachi Unified Storage
systems. They would like a solution to centrally configure their Point-in-Time copies. Which product would
you recommend?
A. Hitachi Dynamic Replicator
B. Hitachi Universal Replicator
C. Business Continuity Manager
D. Hitachi Replication Manager
Answer: D
Hitachi HH0-220問題集 HH0-220
NO.6 How should the Hitachi Unified Storage systems dual power supplies be connected?
A. by FS6 circuits breakers
B. only one should be connected, the other being standby
C. by adjacent sockets on a single power distribution unit
D. by two independent and appropriately rated power distribution units
Answer: D
Hitachi HH0-220問題集 HH0-220参考書 HH0-220認定証 HH0-220 HH0-220認定試験
NO.7 A Hitachi Unified Storage system is connected to a Solaris server. If you want to optimize performance
for the host I/Os, how do you determine the appropriate queue depth value?
A. Set queue depth to 1.
B. Use the operating system default value.
C. The value is set according to the results of the initial SCSI inquiry.
D. Using the Host installation guide for Fibre Channel.
Answer: D
Hitachi認定資格 HH0-220 HH0-220認定試験
NO.8 You are upgrading a Hitachi Unified Storage (HUS) system with the File Module option. Which
combination is required to support this upgrade?
A. FC connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
B. 10GbE connectivity between the HUS and the File Module plus the Hitachi BOS M software bundle
C. FCoE connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
D. FC connectivity between the HUS and the File Module plus the Hitachi BOS N software bundle
Answer: A
Hitachi認証試験 HH0-220 HH0-220 HH0-220
NO.9 You have just allocated four 3TB LUNs from a Hitachi Unified Storage System to a set of ESX 4.x
servers. The VMware administrator can see volumes that are assigned to the servers from an older
storage array, but not the volumes you have just allocated. What is the most likely cause?
A. The FC switch ports need to be disabled/enabled to force the HBAs to re-login to the fabric.
B. This a newer storage array with an older version of ESX so the HBA drivers need to be updated.
C. ESX 4.x servers cannot recognize volumes that are 2TB or larger.
D. The rescan function in VMware is not working, so both servers need to be rebooted.
Answer: C
Hitachi過去問 HH0-220 HH0-220 HH0-220 HH0-220認定資格
NO.10 You have been asked to allocate storage from a Hitachi Unified Storage system to a cluster of AIX
hosts. The application owner wants you to make sure that the queue depth is set to 16 for all the LUNs.
Where do you define the queue depth?
A. on each LUN
B. on the server HBAs
C. on the WWNN Target Ports
D. on the WWPN Target Ports
Answer: A
Hitachi認定資格 HH0-220認証試験 HH0-220認定資格 HH0-220問題集
NO.11 What are three characteristics of the Hitachi Unified Storage systems active/active controller design?
(Choose three.)
A. SNM2 GUI is used to turn on active/active controller processing.
B. Workload is automatically balanced between controllers.
C. When creating a LUN the default controller must be selected.
D. The processor of Ctlr0 can access the Fibre Channel (FC) ports of Ctrl1.
E. Non disruptive firmware upgrade is possible even if a host is connected by only one path.
Answer: B,D,E
Hitachi認定試験 HH0-220 HH0-220認証試験 HH0-220問題集
NO.12 A customer has identified a performance bottleneck with Online Transaction Processing (OLTP)
production host LUNs. The performance improvement plan includes a change to the Hitachi Dynamic Link
Manager load balancing algorithm which is currently set to Round Robin. Which setting would you
recommend?
A. Least I/Os
B. Least blocks
C. Extended Round Robin
D. Extended Least blocks
Answer: A
Hitachi HH0-220認定試験 HH0-220過去問 HH0-220認定資格
NO.13 A customer wants to migrate data between two Hitachi Unified Storage systems using TrueCopy. What
are two requirements? (Choose two.)
A. The DM-LU must be greater than 10GB.
B. There must be FC connectivity between the arrays.
C. The P-Vol and S-Vol size must be equal.
D. A Command Device must be created.
Answer: A,C
Hitachi認定試験 HH0-220参考書 HH0-220 HH0-220 HH0-220認定試験
NO.14 You want to configure SNMP on a Hitachi Unified Storage system. The license key is already installed
and enabled. What are two key steps when configuring SNMP? (Choose two.)
A. Import the MIB file into the HUS.
B. Install an SNMP Manager on the HUS.
C. Create the SNMP environment file in the HUS.
D. Register the SNMP configuration files in the HUS.
Answer: C,D
Hitachi HH0-220 HH0-220 HH0-220練習問題 HH0-220 HH0-220参考書
NO.15 Which two operations can be performed with the Web utility on a Hitachi Unified Storage system?
(Choose two.)
A. Take a simple trace.
B. Install license keys.
C. Perform an online microcode update.
D. Perform an offline microcode update.
Answer: A,D
Hitachi問題集 HH0-220認定証 HH0-220問題集 HH0-220 HH0-220認定資格 HH0-220認証試験
NO.16 A customer wants to create a multi-path environment for a specific Redhat Linux application on a
Hitachi Unified Storage system. They have created Host Groups on all of the available ports and mapped
the logical units accordingly. Which two multi-pathing options can be used for active/active connectivity?
(Choose two.)
A. Device Mapper
B. Multipath I/O (MPIO)
C. Hitachi Dynamic Link Manager
D. Multiplexed I/O (MPxIO)
Answer: A,C
Hitachi HH0-220問題集 HH0-220 HH0-220 HH0-220参考書
NO.17 A customer will be implementing a Hitachi Unified Storage File Module two-node NAS cluster with one
SMU. How many power connections are necessary?
A. 3
B. 4
C. 5
D. 6
Answer: C
Hitachi HH0-220認定証 HH0-220認定資格 HH0-220
NO.18 What are two ways to register a new Hitachi Unified Storage system with Storage Navigator Modular 2?
(Choose two.)
A. SNM2 can scan a range of IP addresses.
B. SNM2 can import a .CSV file containing IP addresses.
C. The controller IP addresses can be entered into SNM2.
D. SNM2 automatically detects connected arrays using UDP broadcasts.
Answer: A,C
Hitachi HH0-220問題集 HH0-220認定証 HH0-220 HH0-220問題集
NO.19 What are two effects of persistent binding? (Choose two.)
A. Persistent binding can speed up path failover.
B. Persistent binding guarantees Command Device security.
C. Persistent binding can speed up the server boot process.
D. Persistent binding guarantees that target assignments are preserved between reboots.
Answer: C,D
Hitachi認証試験 HH0-220 HH0-220過去問 HH0-220
NO.20 What needs to be replaced in case of a local memory DIMM failure on a Hitachi Unified Storage
controller?
A. the controller
B. the local memory DIMM
C. the controller and the local memory DIMM
D. the controller, the local memory DIMM and the cache DIMMs
Answer: C
Hitachi HH0-220 HH0-220認定試験 HH0-220認定試験
JPexamは最新のC_TADM51_70問題集と高品質のMSC-331問題と回答を提供します。JPexamの000-278 VCEテストエンジンと70-417試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のBAS-013 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论