Latest training guide for HP HP0-J39

HP0-J39 is an HP certification exam, so HP0-J39 is the first step to set foot on the road of HP certification. HP0-J39 certification exam become more and more fiery and more and more people participate in HP0-J39 exam, but passing rate of HP0-J39 certification exam is not very high.When you select HP0-J39 exam, do you want to choose an exam training courses?

IT-Tests.com is a professional website to specially provide training tools for IT certification exams and a good choice to help you pass HP0-J39 exam,too. IT-Tests.com provide exam materials about HP0-J39 certification exam for you to consolidate learning opportunities. IT-Tests.com will provide all the latest and accurate exam practice questions and answers for the staff to participate in HP0-J39 certification exam.

The exam questions and answers of general HP certification exams are produced by the IT specialist professional experience. IT-Tests.com just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our IT-Tests's practice questions and answers have 100% accuracy. Purchasing products of IT-Tests.com you can easily obtain HP certification and so that you will have a very great improvement in IT area.

HP0-J39 (Designing and Implementing HP P4000 SAN Solutions) Free Demo Download: http://pdf.it-tests.com/HP0-J39.pdf

NO.1 How does the HP P4000 SAN solution allow aggregate application performance to be increased when
capacity is added?
A. Capacity and performance are adjusted on a linear scale.
B. Application priority can be adjusted.
C. Capacity and performance are dynamically adjusted to maintain balance.
D. Capacity and performance are balanced through the configuration of expansion modules.
Answer: A

HP   HP0-J39 exam simulations   HP0-J39   HP0-J39

NO.2 What are characteristics of device specific module MPIO (DSM MPIO)? (Select two.)
A. DSM MPIO redirectsiSCSI communication to the least busy storage node.
B. DSM MPIO communication offers better performance than non-DSM MPIO communication.
C. DSM MPIO is available for all operating systems withiSCSI support.
D. DSM MPIO provides the servers with the data mapping of each node.
E. DSM MPIO provides a set of built-in data transport security features.
Answer: B,D

HP study guide   HP0-J39   HP0-J39 test questions   HP0-J39   HP0-J39 exam

NO.3 What is the recommended network latency on a multi-site SAN subnet?
A. below 2 ms
B. below 5 ms
C. below 9 ms
D. below 15 ms
Answer: A

HP   HP0-J39   HP0-J39

NO.4 Which statements about HP P4000 SAN Network RAID levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The Network RAID level is defined per storage node.
F. The number of storage nodes in the cluster can limit the Network RAID level.
Answer: B,D,F

HP study guide   HP0-J39 demo   HP0-J39 braindump   HP0-J39 original questions

NO.5 Click the Exhibit button. Which network protocol should be enabled when using ProCurve switches in an
iSCSI storage network?
A. Mesh Protocol
B. Simple Loop Prevention Protocol
C. Rapid Spanning Tree Protocol
D. Point-to-Point Protocol
Answer: C

HP   HP0-J39   HP0-J39   HP0-J39 exam prep   HP0-J39

NO.6 Which benefit does a virtual IP load balancing (VIPLB) initiator provide?
A. directsiSCSI communication to the least busy storage module
B. supports simultaneousiSCSI communication with multiple storage modules
C. selects the next storage module in the list foriSCSI communication
D. prefers the fastest connection foriSCSI communication
Answer: A

HP   HP0-J39   HP0-J39   HP0-J39

NO.7 At which level in HP P4000 SAN solutions is RAID configured?
A. storage node
B. volume
C. management group
D. cluster
Answer: A

HP   HP0-J39   HP0-J39   HP0-J39 certification   HP0-J39 exam

NO.8 What are potential purposes to utilize snapshots? (Select two.)
A. to restore files without tape or backup software
B. to protect against unintended manual data deletion
C. to protect against disk failures
D. to protect against multiple hardware failures
E. to prevent sensitive data from modification
Answer: A,B

HP braindump   HP0-J39   HP0-J39 original questions   HP0-J39 practice test

NO.9 What is a major enhancement of SAN/iQ 8.5 over SAN/iQ 8.1?
A. Network RAID 1 and 10
B. Network RAID 5 and 6
C. application-managed snapshots
D. thin provisionedSmartClone
Answer: B

HP   HP0-J39   HP0-J39   HP0-J39   HP0-J39 exam simulations

NO.10 A design consists of an HP P4000 SAN solution installed across four sites. How many servers running
the central management console are required to manage the solution?
A. 8
B. 4
C. 2
D. 1
Answer: D

HP   HP0-J39 dumps   HP0-J39

NO.11 Which statements about remote copies are correct? (Select two.)
A. Remote copiescan not be mounted.
B. Remote copies are always thin provisioned.
C. Remote copies are asynchronous replicas of a volume.
D. Remote copies can be synchronous and asynchronous.
E. Remote copies are asynchronous replicas between different clusters.
Answer: B,C

HP   HP0-J39   HP0-J39 test   HP0-J39 original questions   HP0-J39

NO.12 Which operating systems does the HP P4000 SAN solution support? (Select three.)
A. Solaris 9
B. OS X Leopard 10.5.5
C. HP OpenVMS 8.3
D. Novell NetWare 6.5
E. SUSE Linux Enterprise Server 10
Answer: B,D,E

HP exam prep   HP0-J39 braindump   HP0-J39   HP0-J39   HP0-J39

NO.13 Which HBA and iSCSI initiator combination does the iSCSI protocol support? (Select two.)
A. iSCSI HBA with TCP offload engine (TOE)
B. softwareiSCSI initiator with Fibre Channel HBA
C. softwareiSCSI initiator with InfiniBand HBA
D. iSCSI Fibre Channel HBA with TCP TOE software iSCSI initiator
E. softwareiSCSI initiator with NIC
Answer: A,E

HP certification training   HP0-J39   HP0-J39

NO.14 Which instance is responsible for access control?
A. cluster
B. server
C. management group
D. volume
Answer: B

HP test questions   HP0-J39 test answers   HP0-J39 dumps

NO.15 What are the correct steps to create a remote copy on a P4000 G2?
A. Create the remote volume and link it to the primary volume, copy the data.
B. Create the primary volume, create the remote volume and link it to the primary volume, copy the data.
C. Create the remote volume andsnapshot, link the primary volume to the remote snapshot, copy the
data.
D. Create the primary snapshot, create the remote volume and snapshot, link it to the primary
snapshot,copy the data.
Answer: D

HP certification   HP0-J39 study guide   HP0-J39 test questions   HP0-J39