2014年1月3日星期五

Cisco 642-681認定試験に関連する最高の参考資料を薦める

IT認定試験に関連する資料を提供するプロなウェブサイトとして、JPexamはずっと受験生に優秀な試験参考書を提供し、数え切れない人を助けました。JPexamの642-681問題集はあなたに試験に合格する自信を与えて、楽に試験を受けさせます。この642-681問題集を利用して短時間の準備だけで試験に合格することができますよ。不思議でしょう。しかし、これは本当なことです。この問題集を利用する限り、JPexamは奇跡を見せることができます。

JPexamの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったCiscoの642-681認証試験について教育資料が完成してから、大変にお客様に歓迎されます。JPexamの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。

JPexamのCiscoの642-681試験資料は同じシラバスに従って研究されたのです。それに、資料もずっとアップグレードしていますから、実際の試験問題とよく似ています。JPexamの試験合格率も非常に高いことは否定することができない事実です。JPexamのCiscoの642-681試験トレーニング資料の値段は手頃で、IT認証の受験生のみなさんによく適用します。

Ciscoの642-681認定試験は現在のIT領域で本当に人気がある試験です。この試験の認証資格を取るのは昇進したい人々の一番良く、最も効果的な選択です。しかも、この試験を通して、あなたも自分の技能を高めて、仕事に役に立つスキルを多くマスターすることができます。そうすれば、あなたはもっと素敵に自分の仕事をやることができ、あなたの優れた能力を他の人に見せることができます。この方法だけであなたはより多くの機会を得ることができます。

試験番号:642-681問題集
試験科目:Advanced Wireless LAN for System Engineers Exam
最近更新時間:2014-01-03
問題と解答:全93問
100%の返金保証。1年間の無料アップデート。

642-681認定試験の準備を完了したのですか。試験を目前に控え、自信満々と受験することができますか。もしまだ試験に合格する自信を持っていないなら、ここで最高の試験参考書を推奨します。ただ短時間の勉強で試験に合格できる最新の642-681問題集が登場しました。この素晴らしい問題集はJPexamによって提供されます。

JPexamの642-681参考書は間違いなくあなたが一番信頼できる642-681試験に関連する資料です。まだそれを信じていないなら、すぐに自分で体験してください。そうすると、きっと私の言葉を信じるようになります。JPexamのサイトをクリックして問題集のデモをダウンロードすることができますから、ご利用ください。PDF版でもソフト版でも提供されていますから、先ず体験して下さい。問題集の品質を自分自身で確かめましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/642-681_exam.html

NO.1 How is a bridge group name used in a wireless mesh deployment?
A. It is used to retrieve the secret shared key.
B. It logically groups access points to avoid interference from neighboring mesh networks.
C. It is used as a password in communication preceding LWAPP.
D. It is used to join the outdoor mesh network with the controller mobility group.
Answer: B

Cisco参考書   642-681   642-681   642-681   642-681過去問

NO.2 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance?
(Choose three.)
A. wireless controller
B. wireless domain server
C. Cisco Wireless Control System
D. controller-based access point
E. standalone access point
F. CiscoWorks Wireless LAN Solution Engine
Answer: ACD

Cisco認定試験   642-681   642-681練習問題   642-681

NO.3 Which statement describes how RSSI information is processed in a WLAN with a location appliance
using controller-based products?
A. Access points aggregate RSSI information.
B. WLAN controllers compute RSSI information.
C. The location appliance collects the RSSI information.
D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location
appliance.
Answer: C

Cisco過去問   642-681   642-681   642-681練習問題   642-681認証試験

NO.4 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two
FCC-approved frequency ranges? (Choose two.)
A. 900 to 928 MHz
B. 2.400 to 2.4835 GHz
C. 4.940 to 4.990 GHz
D. 5.150 to 5.250 GHz
E. 5.725 to 5.825 GHz
Answer: BC

Cisco認証試験   642-681問題集   642-681認証試験   642-681認定資格   642-681   642-681練習問題

NO.5 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access
points?
A. Cisco 1812
B. Cisco 1811
C. Cisco 1841
D. Cisco 1803
Answer: C

Cisco   642-681認定証   642-681問題集   642-681

NO.6 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.)
A. It supports up to 100 access points per module.
B. It supports up to 200 access points per module.
C. It supports up to 300 access points per module.
D. It has a maximum of four modules per chassis.
E. It has a maximum of five modules per chassis.
F. It has a maximum of six modules per chassis.
Answer: CE

Cisco   642-681   642-681   642-681

NO.7 OFDM provides which improvement over DSSS in the 2.4-GHz range?
A. greater resistance to multipath interference
B. more nonoverlapping channels
C. more bandwidth per channel
D. full-duplex communication
Answer: A

Cisco過去問   642-681認定証   642-681練習問題   642-681練習問題

NO.8 How many prior configuration versions can be archived on the CiscoWorks WLSE?
A. two
B. four
C. six
D. eight
Answer: B

Cisco   642-681   642-681認定資格   642-681認定試験   642-681問題集

NO.9 In a mesh network, what is the recommended hop-count limit of a mesh access point from its
associated root access point?
A. 2
B. 4
C. 6
D. 8
Answer: B

Cisco   642-681認定証   642-681   642-681

NO.10 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location
Appliance can track, operating with Cisco WCS version 4.0?
A. 500
B. 1000
C. 1500
D. 2500
Answer: D

Cisco   642-681   642-681認定試験   642-681   642-681

NO.11 A customer has a small remote site with 10 standalone access points. In which two of the following
scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.)
A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available.
B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available.
C. EAP-FAST security is required and no external AAA server is available.
D. EAP-FAST security is required and an AAA server is available.
E. MAC authentication is required and no external AAA server is available.
F. MAC authentication is required and an external AAA server is available.
Answer: BC

Cisco過去問   642-681   642-681認証試験   642-681

NO.12 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70-percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the current
cable plant will support it.
A wireless bridging solution would provide which three benefits to the customer? (Choose three.)
A. rapid deployment
B. immunity to weather
C. increased bandwidth
D. guaranteed bandwidth
E. increased security
F. lower total cost of ownership
Answer: ACF

Cisco認証試験   642-681   642-681過去問   642-681   642-681認定証

NO.13 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable
plant will support it.
Which deployment option would provide the most benefit to the customer?
A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D
B. point-to-multipoint solution with the root bridge located at the manufacturing facility
C. point-to-multipoint solution with the root bridge located at the corporate office
D. point-to-multipoint solution with the root bridge located at the R&D facility
Answer: D

Cisco   642-681   642-681

NO.14 Which two key features are unique to the controller-based feature set? (Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. access point registration via digital certificate
E. dynamic RF control without a dedicated management platform
Answer: DE

Cisco   642-681認定証   642-681   642-681

NO.15 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by
the Wireless LAN Controller? (Choose three.)
A. ad-hoc network detection
B. rogue network detection
C. rogue access point detection
D. deauth flood detection
E. fake access point detection
F. NetStumbler detection
Answer: DEF

Cisco認定資格   642-681   642-681問題集   642-681   642-681

NO.16 What is the maximum number of access points that a high-end Cisco WCS server can support?
A. 500
B. 1000
C. 1500
D. 3000
Answer: D

Cisco認定資格   642-681認定試験   642-681認定証   642-681   642-681認定資格

NO.17 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks
WLSE 1130-19 with RF management enabled?
A. 1000
B. 1500
C. 1800
D. 2500
Answer: C

Cisco練習問題   642-681練習問題   642-681   642-681   642-681認定試験

NO.18 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D

Cisco練習問題   642-681   642-681   642-681   642-681

NO.19 A customer in the United States requires connectivity between two campus locations that are located
6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is
known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the
interference? (Choose two.)
A. Cisco Aironet 1100 Series Access Point
B. Cisco Aironet 1210 Series Access Point
C. Cisco Aironet 1242AG Series Access Point
D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge
E. Cisco Aironet 1400 Series Wireless Bridge
Answer: CE

Cisco認定資格   642-681   642-681参考書

NO.20 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS?
A. 50
B. 100
C. 150
D. 200
Answer: B

Cisco過去問   642-681   642-681   642-681   642-681過去問

JPexamは最新の00M-503問題集と高品質のHP2-N37問題と回答を提供します。JPexamのHP2-K35 VCEテストエンジンと1z0-593試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-652 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/642-681_exam.html

没有评论:

发表评论