JPexamがHPのHP0-Y21のサンプルの問題のダウンロードを提供して、あなはリスクフリーの購入のプロセスを体験することができます。これは試用の練習問題で、あなたにインタフェースの友好、問題の質と購入する前の価値を見せます。弊社はJPexamのHPのHP0-Y21のサンプルは製品の性質を確かめるに足りて、あなたに満足させると信じております。あなたの権利と利益を保障するために、JPexamは一回で合格しなかったら、全額で返金することを約束します。弊社の目的はあなたが試験に合格することに助けを差し上げるだけでなく、あなたが本物のIT認証の専門家になることを願っています。あなたが仕事を求める競争力を高めて、自分の技術レベルに合わせている技術職を取って、気楽にホワイトカラー労働者になって高い給料を取ることをお祈りします。
HPのHP0-Y21の認定試験証明書を取りたいなら、JPexamが貴方達を提供した資料をかったら、お得です。ass4Testはもっぱら認定試験に参加するIT業界の専門の人士になりたい方のために模擬試験の練習問題と解答を提供した評判の高いサイトでございます。
あなたに最大の利便性を与えるために、JPexamは様々なバージョンの教材を用意しておきます。PDF版のHP0-Y21問題集は読みやすくて、忠実に試験の問題を再現することができます。テストエンジンとして、ソフトウェア版のHP0-Y21問題集はあなたの試験の準備についての進捗状況をテストするために利用することができます。もし試験の準備を十分にしたかどうかを確認したいなら、ソフトウェア版のHP0-Y21問題集を利用して自分のレベルをテストしてください。従って、すぐに自分の弱点や欠点を識別することができ、正しく次のHP0-Y21学習内容を手配することもできます。
この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてHP認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。
試験番号：HP0-Y21問題集
試験科目：ProCurve Core Competencies
最近更新時間：2014-01-04
問題と解答：全79問
100％の返金保証。1年間の無料アップデート。
JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-Y21_exam.html
NO.1 At a customer site, a network technician notices that a device deleted from the Navigation Pane in
ProCurve Manager Plus (PCM+) reappears after two days. How can the technician prevent this behavior?
A. Disable LLDP on the device.
B. Delete the device's subnet from the Managed Subnets list.
C. Configure PCM+ discovery options to ignore the device's VLAN.
D. Add the device to the Excluded Devices list.
Answer: D
HP HP0-Y21問題集 HP0-Y21 HP0-Y21認定証
NO.2 Which VLAN configuration parameters must be reviewed when a network user group relocates to an
office facility with a new network setup? (Select two.)
A. VLAN membership for other workstations in the group's new facility
B. VLAN membership for the switch ports that will provide connectivity for the group's workstations
C. IP addressing for the default VLAN on the switch that will provide connectivity for the group's
workstations
D. VLAN membership for the uplink port on the switch that will provide connectivity between the group
and resources connected to other switches
E. VLAN membership of the default gateway on the switch that will provide connectivity for the group's
workstations
Answer: BD
HP問題集 HP0-Y21認定証 HP0-Y21参考書 HP0-Y21
NO.3 Which ports configured on a ProCurve switch are equivalent to the access ports on a Cisco Systems
switch?
A. edge ports
B. LAG ports
C. untagged ports
D. tagged ports
Answer: C
HP認定試験 HP0-Y21 HP0-Y21 HP0-Y21 HP0-Y21過去問
NO.4 A ProCurve Switch 8212zl must be configured to be the ABR for OSPF areas 0 and 5. While
implementing this configuration, you enter the following command at the switch's CLI:
8212.l(ospf)#area 5 stub 2 no-summary
How will this affect the route tables of other routers in area 5?
A. Only directly connected routes will be listed.
B. Every route known to the 8212zl will be listed with a separate gateway and cost.
C. The only OSPF route will be the interface with the 8212zl.
D. All networks outside area 5 will be summarized as a default route.
Answer: D
HP参考書 HP0-Y21認証試験 HP0-Y21認定資格 HP0-Y21 HP0-Y21認定資格
NO.5 Which methods are used by ProCurve Manager Plus to discover manageable devices? (Select three.)
A. scans TCP ports
B. pings to detect replies
C. scans for ProCurve SNMP identifiers
D. reads ARP table
E. tests for Telnet access
F. listens for LLDP messages
Answer: BDF
HP HP0-Y21 HP0-Y21参考書
NO.6 Which steps are necessary before enabling SSL on a ProCurve switch? (Select two.)
A. Generate an HTTPS client certificate.
B. Import a certificate from a Certificate Authority.
C. Generate a self-signed server certificate.
D. Disable unencrypted Web-based management.
E. Generate public and private keys.
Answer: CE
HP HP0-Y21認定証 HP0-Y21認証試験 HP0-Y21過去問 HP0-Y21
NO.7 What is the effect of issuing the following command at the CLI of a ProCurve Switch 5406zl?
ProCurve Switch 5400zl(config)# include-credentials
A. Management passwords and user names will be displayed in the running configuration.
B. Local management user names and passwords will be stored on the configured RADIUS server.
C. The switch will send and require authentication information for all SNMP communications.
D. User names and passwords will be required for all management access.
Answer: A
HP問題集 HP0-Y21練習問題 HP0-Y21 HP0-Y21 HP0-Y21認証試験 HP0-Y21
NO.8 You configured untagged port members of VLAN 10 and VLAN 20 on a ProCurve Switch 8212zl.
Additionally, you assigned IP addresses to interfaces in both VLANs. While testing the configuration, you
discover that nodes in the two VLANs cannot ping each other. The nodes are configured correctly and
connected to the correct ports.
What must be done on the 8212zl to enable communication between the nodes?
A. Disable ICMP blocking.
B. Enable IP routing.
C. Add connected ports to both VLANs.
D. Define a default gateway.
Answer: B
HP HP0-Y21参考書 HP0-Y21認証試験 HP0-Y21問題集
NO.9 Which command, entered at the CLI of a ProCurve switch, saves the switch's running configuration to
its startup configuration?
A. write config
B. save startup-config
C. write memory
D. save running-config
E. copy running-config startup-config
Answer: C
HP HP0-Y21 HP0-Y21 HP0-Y21認定試験
NO.10 You must configure a ProCurve switch to help protect a customer network from malicious users who
might attempt to exhaust the address pool of the company's DHCP server. Which ProCurve feature will
help to address this vulnerability?
A. DHCP snooping
B. Dynamic ARP protection
C. built-in DHCP server
D. DHCP relay
Answer: A
HP HP0-Y21 HP0-Y21 HP0-Y21 HP0-Y21過去問
NO.11 Which privilege level is indicated by this prompt in the CLI of a ProCurve switch?
Switch_1A#
A. manager
B. operator
C. global configuration
D. viewer
Answer: A
HP HP0-Y21問題集 HP0-Y21 HP0-Y21認定試験 HP0-Y21 HP0-Y21認定証
NO.12 while installing ProCurve Manager Server, you specify 192.168.1.1 as the "Start from device." This
device is a ProCurve Switch 5406zl with IP routing and RIP enabled. The switch has interfaces in four IP
networks, including 192.168.1.0/24.
Which step must be taken to enable ProCurve Manager to discover devices in networks other than
192.168.1.0/24?
A. Perform a Manual Discovery for each VLAN configured on the 5406zl.
B. Import the subnet address ranges from the 5406zl routing table.
C. Configure ProCurve Manager to receive SNMP traps from devices in the networks.
D. Add the other networks to the Managed Subnets list in Discovery Preferences.
Answer: D
HP HP0-Y21参考書 HP0-Y21問題集 HP0-Y21参考書
NO.13 Which configuration and monitoring interfaces are available when you access a ProCurve switch
through Telnet? (Select two.)
A. menu interface
B. ProCurve Manager
C. command line interface
D. boot monitor interface
E. web interface
Answer: AC
HP HP0-Y21認定資格 HP0-Y21 HP0-Y21 HP0-Y21認定試験 HP0-Y21認定証
NO.14 You must define a hostname on a ProCurve Switch 5406zl. Which configuration context must you enter
to perform this task?
A. manager
B. interface configuration
C. operator
D. global configuration
Answer: D
HP HP0-Y21 HP0-Y21問題集 HP0-Y21 HP0-Y21参考書
NO.15 Which methods can be used to update the ProCurve Switch 5412zl software using the CLI? (Select
two.)
A. FTP over IP connection
B. TFTP over serial port connection
C. direct serial port transfer
D. TFTP over IP connection
E. SNMPv3 transfer over IP connection
Answer: CD
HP HP0-Y21認定試験 HP0-Y21
NO.16 Which features are available in ProCurve Manager Plus, but not in ProCurve Manager? (Select two.)
A. alerts notification
B. automatic discovery
C. network topology mapping
D. scheduled software updates
E. CLI device management
F. traffic analysis
Answer: DF
HP練習問題 HP0-Y21認定証 HP0-Y21参考書 HP0-Y21認定資格
NO.17 You must specify network management parameters for ProCurve switches scheduled to be installed
at a customer site. Which two features are offered by SNMPv3, but are not offered by SNMPv1 or
SNMPv2c? (Select two.)
A. configurable trap receiver ports
B. TCP-based message flow control
C. access control based on IP address or DNS name
D. encrypted communications
E. access restrictions based on user identity
Answer: DE
HP HP0-Y21 HP0-Y21 HP0-Y21 HP0-Y21
NO.18 Which authentication methods are supported by the SSH service on ProCurve switches? (Select
three.)
A. MAC-Auth
B. 802.1X
C. Kerberos
D. local user name and password
E. public key
F. RADIUS
Answer: DEF
HP過去問 HP0-Y21 HP0-Y21問題集
NO.19 You must enable IP routing at the CLI of a ProCurve Switch 3500yl, but can remember only that the
command begins with "ip." Which command provides context-sensitive help?
A. 3500yl# ip[ENTER]
B. 3500yl# ip/?[ENTER]
C. 3500yl# help ip[ENTER]
D. 3500yl# ip?[ENTER]
E. 3500yl# ip[TAB]
Answer: E
HP参考書 HP0-Y21 HP0-Y21 HP0-Y21
NO.20 Which statement is correct about the support for LLDP offered by ProCurve switches?
A. The LLDP neighbors table contains the system names and MAC addresses of neighbors.
B. LLDP is a reciprocal protocol that provides acknowledgement for each packet transmitted.
C. LLDP is globally disabled by default to avoid any performance impact.
D. When routing is enabled, LLDP is automatically disabled because LLDP messages cannot be
transmitted over routed interfaces.
Answer: A
HP認定資格 HP0-Y21練習問題 HP0-Y21認証試験 HP0-Y21過去問
NO.21 Port a1 on a ProCurve Switch 5406zl is a tagged member of VLAN 20. Which devices can
communicate through this port? (Select two.)
A. a port on another switch that is a tagged member of VLAN 20
B. a port on another switch that is an untagged member of VLAN 20
C. an end station that cannot insert or remove 802.1Q tags
D. a port on another switch that cannot insert or remove 802.1Q tags
E. an 802.1Q-compliant end station that is a member of VLAN 20
Answer: AE
HP HP0-Y21参考書 HP0-Y21 HP0-Y21
NO.22 You must configure password protection for read/write access to the CLI of a ProCurve switch. Which
command is necessary to complete this task?
A. ProCurve Switch 5304XL(config)# password operator
B. ProCurve Switch 5304XL(config)# password manager
C. ProCurve Switch 5304XL(config)# password administrator
D. ProCurve Switch 5304XL(config)# password port-access
Answer: B
HP HP0-Y21 HP0-Y21 HP0-Y21参考書 HP0-Y21 HP0-Y21練習問題
NO.23 In ProCurve Manager Plus, which user type can configure and manage network devices but cannot
add, delete, or modify user accounts?
A. operator
B. viewer
C. manager
D. administrator
Answer: A
HP参考書 HP0-Y21 HP0-Y21 HP0-Y21
NO.24 Which statement is correct about the discovery features of ProCurve Manager (PCM) with ProCurve
Manager Plus (PCM+)?
A. PCM+ enables the scheduling of auto-discovery; PCM requires users to initiate discovery manually.
B. PCM+ and PCM use identical discovery processes.
C. PCM+ supports discovery based on LLDP, CDP and FDP; PCM supports discovery based only on
CDP and FDP.
D. PCM+ will discover devices from manufacturers other than HP; PCM will only discover ProCurve
devices.
Answer: B
HP HP0-Y21 HP0-Y21 HP0-Y21認定証 HP0-Y21練習問題
NO.25 Click the Exhibit button.
Which command enables the ProCurve Switch 3500yl-24G to execute the config2 configuration file
shown in the exhibit?
A. erase config1
B. copy config2 flash primary
C. config active config2
D. boot system flash secondary
Answer: D
HP問題集 HP0-Y21認証試験 HP0-Y21認証試験 HP0-Y21 HP0-Y21
NO.26 while installing ProCurve Manager Server, you specify 192.168.1.1 as the "Start from device." This
device is a ProCurve Switch 5406zl with IP routing and RIP enabled. The switch has interfaces in four IP
networks, including 192.168.1.0/24.
Which ProCurve devices will be automatically discovered by ProCurve Manager?
A. devices in the 5406zl LLDP neighbor table
B. devices in the 192.168.1.0/24 network
C. devices in all networks in the 5406zl route table
D. devices in all networks directly connected to the 5406zl
Answer: B
HP認定試験 HP0-Y21参考書 HP0-Y21 HP0-Y21 HP0-Y21
NO.27 What is the effect of entering the following command at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-100)#interface a1
A. Port A1 is enabled.
B. The CLI enters the configuration context for port A1.
C. Port A1 becomes a tagged member of VLAN 100.
D. The CLI displays the status of port A1.
Answer: B
HP HP0-Y21 HP0-Y21認定試験
NO.28 What is the effect of the following command issued at the CLI of a ProCurve Switch 5406zl?
ProCurve Switch 5406zl# configure terminal
A. The CLI moves to the global configuration context.
B. The CLI echoes user input to the terminal.
C. The CLI displays current configuration parameters.
D. The CLI provides an interface for configuring terminal variables such as line length.
Answer: A
HP練習問題 HP0-Y21 HP0-Y21 HP0-Y21
NO.29 What is the default username and password for the ProCurve Manager Management Server?
A. username: Manager
password: password
B. username: Administrator
password: admin
C. username: Manager
password: value configured during installation
D. username: Administrator
password: value configured during installation
E. username: value configured during installation
password: value configured during installation
Answer: D
HP認定資格 HP0-Y21 HP0-Y21参考書 HP0-Y21認定資格 HP0-Y21問題集 HP0-Y21
NO.30 Which ProCurve Manager wizard simplifies the task of changing the SNTP server IP address
parameter on 50 ProCurve 5406zl switches?
A. CLI Wizard
B. Switch Update Wizard
C. Configuration Wizard
D. IP Networking Wizard
E. Network Services Wizard
Answer: A
HP認定資格 HP0-Y21認証試験 HP0-Y21 HP0-Y21認定資格
JPexamは最新の700-101問題集と高品質の70-465問題と回答を提供します。JPexamのNS0-145 VCEテストエンジンと9L0-010試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の200-101 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论