MicrosoftのMB7-514認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。MicrosoftのMB7-514試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。JPexamのMicrosoftのMB7-514試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
Microsoft MB7-514認証はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。でも、JPexamにいつでも最新な問題を探すことができ、完璧な解説を楽に勉強することができます。
君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからJPexamの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。JPexamだけ全面と高品質の問題集があるのではJPexamの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、JPexamに多くの受験生の歓迎されます。
試験番号：MB7-514問題集
試験科目：NAV 5.0 C/SIDE Introduction
最近更新時間：2014-03-10
問題と解答：全104問
100％の返金保証。1年間の無料アップデート。
JPexamは多くの認証業界の評判を持っています。それは我々はMicrosoftのMB7-514問題集やMB7-514スタディガイドやMB7-514問題と解答がたくさんありますから。現在のサイトで最もプロなITテストベンダーとして我々は完璧なアフターサービスを提供します。全てのお客様に追跡サービスを差し上げますから、あなたが買ったあとの一年間で、弊社は全てのお客様に問題集のアップグレードを無料に提供します。その間で認定テストセンターのMicrosoftのMB7-514試験問題は修正とか表示されたら、無料にお客様に保護して差し上げます。MicrosoftのMB7-514試験問題集はJPexamのIT領域の専門家が心を込めて研究したものですから、JPexamのMicrosoftのMB7-514試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MB7-514_exam.html
NO.1 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.2 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.3 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.4 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.5 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.6 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.7 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.8 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.9 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.10 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.11 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.12 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.13 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.14 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.15 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.16 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.17 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.18 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.19 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft MB7-514認定試験 MB7-514 MB7-514
NO.20 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft MB7-514認定試験 MB7-514 MB7-514
JPexamは最新の1z0-457問題集と高品質の000-N38問題と回答を提供します。JPexamの00M-654 VCEテストエンジンとHP2-Z25試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-N45 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论