JPexamはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。JPexamは専門のIT業界での評判が高くて、あなたがインターネットでJPexamの部分のMicrosoft 70-649資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。
JPexam を選択して１００％の合格率を確保することができて、もし試験に失敗したら、JPexamが全額で返金いたします。
JPexamが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、Microsoftの70-649試験も一年の無料アップデートになっています。
JPexamの商品は100%の合格率を保証いたします。JPexamはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JPexamの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。
Microsoftの70-649の認定試験の受験生は試験に合格することが難しいというのをよく知っています。しかし、試験に合格することが成功への唯一の道ですから、試験を受けることを選ばなければなりません。職業価値を高めるために、あなたは認定試験に合格する必要があります。JPexamが開発された試験の問題と解答は異なるターゲットに含まれていますし、カバー率が高いですから、それを超える書籍や資料が絶対ありません。大勢の人たちの利用結果によると、JPexamの合格率は１００パーセントに達したのですから、絶対あなたが試験を受かることに重要な助けになれます。JPexamは唯一のあなたの向いている試験に合格する方法で、JPexamを選んだら、美しい未来を選んだということになります。
あなたに最大の利便性を与えるために、JPexamは様々なバージョンの教材を用意しておきます。PDF版の70-649問題集は読みやすくて、忠実に試験の問題を再現することができます。テストエンジンとして、ソフトウェア版の70-649問題集はあなたの試験の準備についての進捗状況をテストするために利用することができます。もし試験の準備を十分にしたかどうかを確認したいなら、ソフトウェア版の70-649問題集を利用して自分のレベルをテストしてください。従って、すぐに自分の弱点や欠点を識別することができ、正しく次の70-649学習内容を手配することもできます。
試験番号：70-649問題集
試験科目：TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist
最近更新時間：2014-03-10
問題と解答：全278問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/70-649_exam.html
NO.1 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D
Microsoft 70-649 70-649認証試験 70-649 70-649認定証
NO.2 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D
Microsoft 70-649 70-649
NO.3 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C
Microsoft 70-649参考書 70-649問題集 70-649
NO.4 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C
Microsoft認定資格 70-649 70-649認定資格 70-649 70-649
NO.5 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B
Microsoft 70-649過去問 70-649 70-649 70-649練習問題
NO.6 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C
Microsoft 70-649 70-649過去問 70-649
NO.7 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B
Microsoft 70-649 70-649 70-649認定試験
NO.8 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C
Microsoft認定証 70-649 70-649
NO.9 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B
Microsoft認定証 70-649 70-649練習問題 70-649
NO.10 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B
Microsoft認定証 70-649 70-649認定試験 70-649
NO.11 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B
Microsoft過去問 70-649認定証 70-649 70-649 70-649問題集 70-649参考書
NO.12 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A
Microsoft 70-649過去問 70-649認定証 70-649練習問題 70-649 70-649認定試験
NO.13 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B
Microsoft 70-649問題集 70-649 70-649
NO.14 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C
Microsoft参考書 70-649 70-649過去問 70-649 70-649認定証
NO.15 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B
Microsoft 70-649 70-649認定試験 70-649認証試験 70-649
NO.16 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C
Microsoft問題集 70-649認定証 70-649 70-649認定資格
NO.17 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B
Microsoft過去問 70-649 70-649認定証
NO.18 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC
Microsoft 70-649認定資格 70-649 70-649
NO.19 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A
Microsoft参考書 70-649 70-649認証試験 70-649過去問 70-649 70-649
NO.20 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C
Microsoft認証試験 70-649 70-649参考書 70-649過去問 70-649練習問題 70-649
JPexamは最新のVCAP5-DCD問題集と高品質のCAT-221問題と回答を提供します。JPexamの100-101 VCEテストエンジンとHP0-J62試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のNS0-504 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论